|This product has been discontinued. It can no longer be found in retail stores.|
1.47L of water
The XP 310 is a 2000 XP Larami Super Soaker that holds 1.2L of water. It is a fairly large soaker and is the successor of the 1998 XP 110. The XP 310 featured a pressure gauge, something not many Super Soakers had even until that point, two pressure chambers and a nozzle selector, something only one other XP Super Soaker had until then. The XP 310 was discontinued a few years later to make way for more powerful blaster designs, such as the Max-D 6000. It is no longer available as its home line has since been discontinued. It is classified as an air blaster with a separate pressure chamber.
The XP 310 is a standard rifle-sized soaker, with a blue body with red accents, clear yellow reservoir, dual clear yellow pressure chambers and a black angled pump. The reservoir of the blaster has a tethered cap to prevent loss of the cap. The XP 310 has four nozzle settings; 1×, 1.2×, 1.5× and 2×.
The XP 310 has internals standard for air blasters for its time. It has a pull valve trigger, hoses, two separate firing chambers and an air pump among other things.
Blaster Co-relation Edit
The XP 310 was the successor of the older XP 110.
Like most other blasters, the XP 310 has faults. The main fault with the soaker is that it is rather weak compared to blasters of today, due to its low-powered nozzle settings; the XP 310 has been somewhat outclassed by newer XP blasters, but still manages to hold its own.
How to Fire Edit
Step 1 - Unscrew the tethered cap and load the reservoir with water.
Step 2 - Screw the cap back on.
Step 3 - Pump the blaster 11-12 times.
Step 4 - Pull the trigger to fire a stream of water.